ADEX-RS

Exterior Insulation and Finish (EIF) cladding system with a liquid applied weather resistive barrier (LA-WRB) and drainage cavity. CCMC evaluation # 12913-R. The ADEX-RS system, or its major components meet the following non-combustibility standards:

CAN/ULC-S134

CAN/ULC-S114

CAN/ULC-S101

ADEX-HC

Hard coat Exterior Insulation and Finish (EIF) cladding system over extruded polystyrene.

ADEX-XNC

Non-combustible Exterior Insulation and Finish (EIF) cladding system installed over mineral wool.

ADEX-ICF

Architectural coating system designed for buildings using Insulated Concrete Forms.

ADEX-VCA

Exterior Insulation and Finish (EIFS) cladding with a liquid applied weather resistive barrier (LA-WRB) and drainage cavity using flat EPS. CCMC evaluation # 12913-R.

ADEX-MFS

Mechanically fastened water-managed exterior continuous insulation and finish system that has been favourably evaluated by CCMC (12913-R).

ADEX-CB

Cement board based cladding system with a ventilated drainage cavity meeting CAN/ULC-S101 and S114 fire resistance standards.

ADEX-VLS

Cavity wall lightweight architectural coating system using polyisocyanurate boards.

ADEX-ABS

The adex-ABS system is thin stone or brick veneer installed over a water-managed exterior insulation and finish system.

ADEX-PRIMA STUCCO

Cladding assembly system that incorporates Adex acrylic finish coatings installed over a proprietary, code-conforming stucco base coat.

ADEX-DIREX

Direct applied system for all types of masonry and concrete surfaces.

ADEX-POOL

Barrier cladding application designed specifically for high-humidity locations such as interior swimming pools.